iso-Octyltriethoxysilane Silane ishigh purity, undiluted Noctyltriethoxy-silane. Whendiluted with an appropriate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydro-phobic and retain their original appearance.

iso-Octyltriethoxysilane Silane can also be used to improve the compatibility of mineral fillers or pigments in polyolefins or to ease their dispersion in nonpolar matrices.

iso-Octyltriethoxysilane Silane is a small molecule to allow for deep penetration into the cementitious surface. This material reacts with moisture in the air and n the substrate in the presence of an alkaline or acidic environment to produce hydroxy groups. These hydroxy groups will bond with the substrate and tself to produce a hydrophobic treatment that inhibits water absorption into the substrate. An alkaline environment, such as new concrete, will catalyze the reaction and speed the formation of the hydrophobic surface.

Operation  Instruction  of  IBC ：

Inner layer: 4-fluoroethylene drum, 250 kg volume 220kg net weight, and other Argon Protective Layers

Middle layer: 6-7 layers of foam for earthquake Prevention

Outer layer : Fixation of steel frame or hard plastic shell and bottom silica gel protection

HOW TO USE

Dilution

iso-Octyltriethoxysilane Silane can be diluted in solvents such as alcohols, chlorinated solvents, aliphatic solvents and low molecular weight cyclic polydimethylsiloxane such as CG-D4 Cyclotetrasiloxane before use. Typical dilution levels are 40 percent and 20 percent CG-I823 Silane in a solvent.
Blends of the solvents can also be used. The evaporation rate of the diluted material can be modified depending on the type and concen-tration of the solvent. Select the proper solvent for your application, as  some silane/solvent blends may darken the surface. Refer to the manufacturer ’ s data sheet for proper handling and disposal of solvents.